Mixing shaft BIONIK G 4 Turbo

TECNICAL ATTRIBUTES:

• Mixing intensity: AAA (Shows the degree of mixing that can be achieved with the mixing shaft.)
• Pressure intensity: 223 cm² (Describes the conveying behaviour to the pump. The material is pressed downwards over the large contact surface of the mixing spiral arm.)
• suitable for:: G4 / G5

Mixing shaft BIONIK RITMO XL machine plaster HD

TECNICAL ATTRIBUTES:

• Mixing intensity: A (Shows the degree of mixing that can be achieved with the mixing shaft.)
• Pressure intensity: 96 cm² (Describes the conveying behaviour to the pump. The material is pressed downwards over the large contact surface of the mixing spiral arm.)
• suitable for: RITMO XL

Mixing shaft BIONIK RITMO L plus machine plaster

TECNICAL ATTRIBUTES:

• Mixing intensity: A (Shows the degree of mixing that can be achieved with the mixing shaft.)
• Pressure intensity: 127 cm² (Describes the conveying behaviour to the pump. The material is pressed downwards over the large contact surface of the mixing spiral arm.)
• suitable for: RITMO L plus

RITMO L FC-230V plus - SD 6-3 [PFT 00657443]

Tecnical Data

• Max. working pressure 20 bar*
• Conveying capacity*: continuously adjustable up to 14 litres / min
• Conveying distance max.* up to 20 m
• Motor 230 V, 1 Ph, 50 Hz, 2,2 kW, 55 – 475 rpm
• Hopper content 45 litres
• Connection cable BLU 3-16 A | BLU 2-16 A – 25m
• Rotor/stator SD 6-3 slimline
• Spraying gun DN25-360° S10 200 Ewo
• Air compressor COMP R-80, 230 V, 1 Ph, 50 Hz, 0,35 kW, 80 l/min
• Material outflow DN25 male part
• Material hose RONDO DN25 – 5 m + 15 m
• Dimensions: L/W/H 750/600/1,340 mm
• Filling height 900 mm
• Weight ~125 kg

* Reference values depending on the mortar quality, mortar composition, mortar consistency, pump design, pump condition, feed hose diameter and delivery height. Finally, the respective guidelines of the mortar manufacturer are decisive.

RITMO L FC-230V plus - SD 6-3 [PFT 00657443]

APPLICATIONS

For all materials such as:

• Interior plastering
• Finishing coat
• Knifing filler
• Levelling compounds
• Liquid filling compound
• Grouting mortar for door frames
• Upgraded insulation
• Dispersion paints
• BETOKONTAKT
• Restoration mortar

RITMO L FC-230V plus - SD 6-3 [PFT 00657443]

STANDARD EQUIPMENT

• Mixing tube with rubber mixing zone
• Control box Ritmo 230 V FC 2.2 kW
• Geared motor 2.2 kW 274 rpm ALU
• Power cable 3 x 2.5 mm², 25 m with plug with earthing contact and CEE plug
• Mixing shaft RITMO L
• Pump unitSD 6-3 slimline
• Mortar pressure gauge 25 mm without coupling 1" galv.
• Mixing tube cleaner RITMO, galvanized
• Cleaning shaft
• Water flow meter 75 - 750 l/h cpl.
• Air compressor DT 4.8 230 V pressure control RITMO
• Exernal vibrator/M-3 230V 50Hz single-phase VA
• Fine plaster spraying gun 25 female part, nozzle 4 mm
• Cleaner coupling 25 male part ID 24 with Geka coupling
• RONDO 25 mm, 15 m, cpl. with hydraulically fitted couplings
• RONDO 25 mm, 5 m, cpl. with hydraulically fitted couplings
• PVC hose NW 9 x 3 mm, 15 m with EWO-coupling
• PVC hose NW 9 x 3 mm, 5 m long with EWO-coupling
• Tool box RITMO L
• Operating instructions

RITMO L FC-230V plus - SD 6-3 [PFT 00657443]

ADVANTAGES AT A GLANCE

1 Suitable for bucket and bag material

2 Flow-optimized output - Mortar pressure gauge integrated

3 Rubber mixing zone for easy cleaning with adapter flange for A and B pump

4 Easy dismountable into single modules - Motor unit (a): 30 kg - Unit of material hopper (b): 28 kg - Chassis (c): 64 kg - Mixing shaft (d): 3 kg

4 In series equipped with external vibrator

5 Flexible mixing intensity thanks to two water inlets

6 Easy handling on start-up, retrofitting, maintenance and cleaning - Foldable motor - Circumferential sealing edge on the material container for accessories

7 Transport is possible in any estate car

• Mounting position for Rotor/Stator mounting
• Conical mixing tube for optimum material flow
• Large insertion area
• Runs powerfully and reliably with luminous flux
• Extension hopper - for double volume
• Complete with compressor, hoses, spraying gun just mount it and there you go
• Additionally equipped with: tool box and external vibrator
• With proven rubber mixing zone
• Fillable out of buckets or bags
• Usable as a pump or as a mixing pump
• Easy handling during operation, modification, maintenance and cleaning
• Flexible mixing intensity due to two water inlets
• Continuously adjustable drive – precise dosage output and mixing performance
• Small, light, handy, compact, rollable - etachable in three modules

Watch RITMO L and RITMO M on  YouTube:

Stator D 7-2,5 wf PIN neXt generation, clockwise - [PFT 00634584]

Technical data:

• Working pressure max.: approx. 25 bar
• Conveying output* (at approx. 400 rpm): approx. 25 l/min
• Inclination: D 7 - 2,5
• Grain size max*.: up to 3 mm

* Indicative depending on quality mortar, mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the material producer.

Cleaning shaft BIONIK Ritmo L plus

TECNICAL ATTRIBUTES:

• Mixing intensity:
• Pressure intensity:
• suitable for: Ritmo L plus

Mixing shaft BIONIK G 4 BiTurbo

TECNICAL ATTRIBUTES:

• Mixing intensity: AAA (Shows the degree of mixing that can be achieved with the mixing shaft.)
• Pressure intensity: 258 cm² (Describes the conveying behaviour to the pump. The material is pressed downwards over the large contact surface of the mixing spiral arm.)
• suitable for:: G4 / G5

Mixing shaft BIONIK G 4 finishing coat plus

TECNICAL ATTRIBUTES:

• Mixing intensity: AA (Shows the degree of mixing that can be achieved with the mixing shaft.)
• Pressure intensity: 172 cm² (Describes the conveying behaviour to the pump. The material is pressed downwards over the large contact surface of the mixing spiral arm.)
• suitable for:: G4 / G5

Mixing shaft BIONIK RITMO L Turbo

TECNICAL ATTRIBUTES:

• Mixing intensity: AAA (Shows the degree of mixing that can be achieved with the mixing shaft.)
• Pressure intensity: 56 cm² (Describes the conveying behaviour to the pump. The material is pressed downwards over the large contact surface of the mixing spiral arm.)
• suitable for: RITMO L