PFT G4 XL, 7.5 kW, 400V, 3Ph, 50Hz with pressure booster pump AV 1000 [PFT 00406795]

TECHNICAL DATA

Output:

• Conveying output, max.: 85 l/min*
• Conveying distance up to: 30 m in DN25)*
• Conveying distance up to: 50 m in DN35)*

Connection value:

• 400 V, 3 Ph, 50 Hz, 7.5 kW
• Control voltage: 42 V

Drive:

• Pump motor: 7.5 kW, 400 rpm
• 2-stage gear box with inclination switch
• Star wheel drive: 0.75 kW, 28 rpm

Pump unit Rotor/Stator:

• D 6–4 · 20 l/min · 40 bar

Grout outlet with mortar pressure gauge:

• DN35 female part

Operation and control:

• Start/stop incl. Water pump control unit

Dimensions:

• Length/width/height: 1,200/720/1,530 mm
• Filling height: 910 mm
• Hopper volume: 145 litres ~ 5 sacks (at 30 kg)
• Total weight: 365 kg

* Reference values depending on the mortar quality, mortar composition, mortar consistency, pump design, pump condition, feed hose diameter and delivery height. Finally, the respective guidelines of the mortar manufacturer are decisive.

PFT G4 XL, 7.5 kW, 400V, 3Ph, 50Hz with pressure booster pump AV 1000 [PFT 00406795]

APPLICATIONS

• Gypsum / gypsum lime plaster
• Cement plaster
• Insulation
• Lime-cement render
• Fango material
• Insulating plaster
• Filling plasters
• Masonry mortar
• Floor screed
• Liquid filler
• Bonding/reinforcing mortar

PFT G4 XL, 7.5 kW, 400V, 3Ph, 50Hz with pressure booster pump AV 1000 [PFT 00406795]

BASIC EQUIPMENT

• Pump drive 7.5 kW, 400 rpm
• Star wheel drive 0.75 kW, 28 rpm – Conveying output: 85 l/min
• Material hopper Capacity 145 litres ~ 5 sacks (30 kg)
• Conical mixing tube for optimum material flow
• Control voltage 42 volts for the greatest operational safety
• Ready for remote control cable
• Grout outlet DN35 female part with mortar pressure gauge
• Pressure flange per improved material flow, extends the rotor/stator life
• Rubber mixing zone, for easy cleaning, with adaptable flange for D and R pump Note: Scope of supply: Suction and pressure flange for D-pump
• Mixing shaft BIONIK G 4, machine-applied plaster
• Switches and connections are inside the basic design
• Connections in the control box: BLA 4-16 | H 4 | RED 4-16 | BLU 2-16
• Tool box including basic accessories
• Mixing tube cleaner with cleaning shaft
• Water connection Geka DN19 (3/4") – Required working pressure 2.5 bar
• Reinforced tubular frame and robust wheel mount
• Forklift straps and crane lifting eyes
• Wind deflector plate on the motor - prevents turbulence in the hopper
• Flexible mixing intensity thanks to two water inlets
• Dry run protection in the material hopper prevents running empty
• Trouble-free operation thanks to large water fine filter with low mesh size

BASIC EQUIPMENT PACKAGE

• Rotor D 6–4 / Stator D 6–4 Pump capacity: max. 20 l/min, 40 bar, up to 40 m conveying distance in DN25 up to 65 m conveying distance in DN35
• Water pump as pressure booster pump AV 1000, 400 V, 3 Ph, 50 Hz, 0.6 kW
• Water flow meter 150 – 1,500 l/h
• RONDO DN25 hydraulic connection Male part | Female part – 15 m
• Air hose DN12 (1/2") Ewo | Geka – 15 m
• Cleaner coupling for cleaning the material hose DN35 female part | Geka
• Adapter coupling DN35 male part | DN25 male part
• Spraying gun DN25-360° S14 200 Geka
• Air compressor COMP M-250-V5 handy, 400 V, 3 Ph, 50 Hz, 0.9 kW, 250 l/min with pressure control

PFT G4 XL, 7.5 kW, 400V, 3Ph, 50Hz with pressure booster pump AV 1000 [PFT 00406795]

HIGHLIGHTS

• Higher pump and conveying output
• Ready for GPS
• Phase sequence monitoring
• Easy cleaning - rubber mixing zone with adaptable flange for D and R pumps
• Reinforced tubular frame and robust wheel mount
• Forklift straps and crane lifting eyes
• Deflector plate - Reduction of dust load
• Large control box - easy to maintain and dust protected
• Switches and connections are inside the basic design
• Trouble-free operation due to large water fine filter
• Simple, fast and efficient - loading the machine with material: - Filling with bagged material - Pneumatic filling from silo by means of PFT SILOMAT conveying system
• Flexible mixing intensity thanks to two water inlets
• Safe transport due to four handles with folding mechanism
• Perfectly maintenance-friendly - water manifold and pressure switch are easily accessible
• Dry run protection in the material hopper prevents the machine from running empty