PFT G4 X FC-230/400V 1/3 ph 50 Hz with pressure booster pump AVO 500 [PFT 00260621]

TECHNICAL DATA

Output:

• Conveying output, max.: 35 l/min
• Conveying distance up to: 15 m in DN25 (230 V)
• 30 m in DN25 (400 V)
• 50 m in DN35 (400 V)*

Connection value:

• 230/400 V, 1/3 Ph, 50 Hz, 5.5 kW
• Control voltage: 42 V

Drive:

• Pump motor 5.5 kW, 400 rpm
• two-stage with inclination switch
• Star wheel motor 0,75 kW, 28 U/min

Water connection:

• Geka 3/4 "
• Water connection pressure: 2,5 bar

Pump unit Rotor/Stator:

• SD 6–3 slimline · 20 l/min · 25 bar

Compressor:

• COMP P-200, 230 V, 1 Ph, 50 Hz, 0.5 kW, 200 l/min – max. 3.4 bar with pressure switch-off

Water pump for pressure boosting:

• AVO 500, 230 V, 1 Ph, 50 Hz, 0,37 kW

Dimensions:

• Length/width/height: 1.200/720/1.530 mm
• Filling height: 910 mm
• Hopper content: 145 l
• Total weight: 290 kg

* Reference values depending on the mortar quality, mortar composition, mortar consistency, pump design, pump condition, feed hose diameter and delivery height. Finally, the respective guidelines of the mortar manufacturer are decisive.

PFT G4 X FC-230/400V 1/3 ph 50 Hz with pressure booster pump AVO 500 [PFT 00260621]

APPLICATIONS

For pumpable ready-mixed dry mortars such as:

• Gypsum plasters
• Lime-gypsum plasters
• Cement plasters
• Lime plasters
• Lime-cement plasters
• Fango materials
• Insulating plasters
• Recessed mortar
• Exterior basecoat
• Floating screeds
• Masonry mortar
• Premixed mortar
• Insulation materials

... and much more

Functional principle:

The distillation zone for holding the ready-mixed mortar is different from the mixing and pump zones. The dry mortar is thrown into the mixing chamber via the tilted feed tray. PFT G 4 can be started and refilled at any time. The feed tray is driven separately and can be dismantled quickly using a central locking.

Filling with bagged cargo:

One for All, all with One. PFT G 4 is the compact, easy-to-transport mixing pump in high-tech engineering, which offers a high delivery rate and large delivery range, and can be combined with the entire range of machines offered by PFT. Thanks to the low filling height, it is perfectly suited for filling with bagged cargo. Ideal for using at small and average-sized construction sites.

Direct filling from silo:

The PFT G 4 mixing pump is designed according to the modular design principle. By using the PFT delivers hood, it can easily and quickly be flange-mounted below any silo/container Well-suited for delivery ranges up to 30 m.

Pneumatic filling with PFT SILOMAT:

Easy, quick and efficient. The PFT SILOMAT discharge vessel can be easily flange-mounted to the silo/container using a couple of grips. The ready-mixed dry mortar is fed to the mixing pump fully automatically and free of dust at the push of a button. The machine is directly placed at the place of use in the process, irrespective of the distance from the silo/container to the usage site. The pneumatic conveying equipment PFT SILOMAT is available in different designs

PFT G4 X FC-230/400V 1/3 ph 50 Hz with pressure booster pump AVO 500 [PFT 00260621]

BASIC EQUIPMENT

• Pump drive 5.5 kW, 400 rpm
• Star wheel drive 0.3 kW, 12 rpm – Conveying output: 35 l/min
• Material hopper, Capacity 145 litres ~ 5 sacks (30 kg)
• Conical mixing tube for optimum material flow
• Control voltage 42 volts for the greatest operational safety
• Ready for remote control cable
• Grout outlet DN35 female part with mortar pressure gauge
• Pressure flange per improved material flow, extends the rotor/stator life
• Rubber mixing zone, for easy cleaning, with adaptable flange for D and R pump Note: Scope of supply: Suction and pressure flange for D-pump
• Mixing shaft BIONIK G 4, machine-applied plaster
• Switches and connections are inside the basic design
• Connections at the control box: GRE 2-16 | H 4 | BLU 3-16
• Tool box including basic accessories
• Mixing tube cleaner with cleaning shaft
• Water connection Geka DN19 (3/4") – Required working pressure 2.5 bar
• Reinforced tubular frame and robust wheel mount
• Forklift straps and crane lifting eyes
• Deflector plate on motor - prevents whirling currents in the hopper
• Flexible mixing intensity thanks to two water inlets
• Frequency converter (FC) for infinitely variable speed control and torque amplification Note: Only in 230 V operation
• Powerful and reliable operation via standard power socket
• Trouble-free operation thanks to large water fine filter with low mesh size

BASIC EQUIPMENT PACKAGE

• Rotor SD 6–3 slimline / Stator SD 6–3 slimline Pump capacity: max. 20 l/min, 25 bar, 230 volts, up to 15 m conveying distance with DN25 400 volts, up to 30 m conveying distance with DN25 400 volts, up to 50 m conveying distance with DN35
• Water pump as pressure booster pump AVO 500, 230 V, 1 Ph, 50 Hz, 0.37 kW
• Water flow meter 150 – 1,500 l/h
• RONDO DN25 hydraulic connection Male part | Female part – 10 m
• Air hose DN12 (1/2") Ewo | Geka – 11 m
• Cleaner coupling for cleaning the material hose DN35 female part | Geka
• Adapter coupling DN35 male part | DN25 male part
• Spraying gun DN25-360° S14 200 Geka
• Air compressor COMP P-200, 230 V, 1 Ph, 50 Hz, 0.5 kW, 200 l/min with pressure control
• Adapter cable RED 5-32 A | BLU 2-16 A – 1 m

Watch G4 neXt generation on  YouTube: